PHYSICAL PROPERTIES:

 

TinSil® 70-10

TinSil® 70-20

TinSil® 70-25

TinSil® 70-30

TinSil® 70-60

Mix ratio, by weight

100B to 10A

100B to 10A

100B to 10A

100B to 2A

100B to 5A

Hardness, Shore A

10

20

25

30

60

Pour time

45 min.

60 min.

60 min.

60 min.

30 min.

Color

Blue

Blue

Blue

Beige

Red

Viscosity, mixed

10,000 cps.

12,000 cps.

15,000 cps.

26,000 cps.

25,000 cps.

Cu. inches/pound

25.3

25.3

25.3

25.3

18

Specific gravity

1.1

1.1

1.1

1.1

1.5

Shrinkage during cure

~0.3%

~0.3%

~0.3%

~0.3%

~0.8%

 

 

 

 

 

 

For Faster Cure - TinSil® FastCat can be used in addition to or in place of any TinSil® Part A for an accelerated demold.
For Softer Cure - Silicone Fluid can be added sparingly to any TinSil® System.

PACKAGING

 

 

                 Containers                

Size

Net lbs.

Product

Weight/lbs.

  A 

  B 

  A 

  B 

TinSil® 70-30
Mix Ratio
2A to 100B

1.02

1 oz.

1 pt.

0.02

1.0

8.30

4 oz.

1 gal.

0.20

8.10

40.80

1 pt.

5 gal.

0.80

40.0

448.80

1 gal.

55 gal.

8.80

440.00

 

 

 

 

 

 

TinSil® 70-60
Mix Ratio
5A to 100B

1.05

1 oz.

1 pt.

0.05

1.0

8.40

1/2 pt.

1 gal.

0.40

8.0

42.00

1 qt.

5 gal.

2.00

40.0

462.00

5 gal.

55 gal.

22.00

440.00

 

 

 

 

 

 

 

TinSil® 70-10
TinSil® 70-20, 70-25
Mix Ratio
10A to 100B

1.00

4 oz.

1 pt.

 

0.10

0.90

9.00

1 pt.

1 pt.

 

0.90

8.10

44.00

1/2 gal.

5 gal.

 

4.00

40.0

495.00

5 gal.

55 gal.

 

45.00

450.00

 

 

 

 

 

 

 

Pol-Ease® 2300 Release Agent:  12 oz. can, Case of 12 cans
Pol-Ease® 2350 Release Agent:  1 qt. (1.5 lbs.), 5 gal. (26 lbs.)
TinThix for thickening TinSil®, 4 oz. (.25 lb.), 1 pt. (1 lb.)
TinSil® FastCat for faster cure, 4 oz. (.20 lb.), 1 pt. (1 lb.)
Silicone Fluid 500 cs or 100 cs grade for thinning PlatSil® or TinSil® Rubbers, 1 qt. (2 lbs.), 1 gal. (8 lbs.), 5 gal. (40 lbs.)

 

Close Window