You are here

Tutorials & Videos

Find Polytek® tutorials based on Product Type, Application or Mold Making and Casting Technique.
PlatSil® 71-20 Poured Block Mold - Part 2

How to make a poured block mold using PlatSil® 71-20 silicone rubber. (Part 1: Preparing the Model, Part 2: Pouring the Mold)

PlatSil® 71-20 Poured Block Mold - Part 1

How to make a poured block mold using PlatSil® 71-20 silicone rubber. (Part 1: Preparing the Model, Part 2: Pouring the Mold)

PlatSil® 71-30 Mold With A Barrier Coat

Spraypaint barrier coat in a PlatSil® 71-30 rubber mold. EasyFlo 60 Liquid Plastic used to produce a pre-primed casting.

Hydrogel Mold Compound & PlatSil® Gel-10

Using the Hydrogel® Mold Compound to make a mold of a hand. Then cast the Platsil® Gel-10 with fleshtone pigment into the Hydrogel mold to create a life-like casting

Poly Skin-Wax Hand Mold & PlatSil® Gel-10 Casting

Using Poly Skinwax to make a mold of a hand. Then using PlatSil® Gel-10 silicone rubber to cast a life-like reproduction.

Poly 74-20 Poured Block Mold

Using Poly 74-20 Liquid rubber to make a poured block mold.

TinSil® 70-25 Poured Blanket Mold

Use Tinsil® 70-25 liquid silicone to make a poured blanket mold. Use Poly 1512X liquid plastic to make a plastic support shell.

Polygel® 35 Brush-On Blanket Mold with Mold Shell

Use Polygel 35 Brush-on rubber to make a brushed blanket mold. Use Poly 1512X to make a plastic support shell.

EasySpray FR and the Plas-Pak Spray System

Polytek's EasySpray FR plastic sprayed with the low cost Plas-Pak Spray System.

Casting with GlassRub 50

Casting rubber parts with Poly GlassRub 50 liquid rubber.