Casting Concrete in Polyurethane vs. Silicone Rubber Molds

Here at Polytek, we often recommend the use of liquid polyurethane rubber to make molds for concrete casting (e.g., concrete tiles, panels, statuary, pavers, bricks, countertops, edging, etc.). Platinum silicone mold rubbers can be appealing because of their great release properties (tin-cured silicones should not be considered for concrete as they shrink over time and deteriorate with age), but overall, we find that the advantages of polyurethane rubber outweigh the advantages of silicone rubber for this particular application. Here are some of the major points of comparison:

 

 

RubberMolds_Concrete-01

 

 [Polyurethane mold rubbers were used for all of the concrete casting projects in the above photo]

 

Efflorescence & Color

We have found that efflorescence, which produces salt deposits on the surface of concrete, more often occurs when silicone rubber molds are used for casting (in comparison to polyurethane rubber molds). This white residue can be aesthetically displeasing and sometimes requires the use of solvents or other chemicals to remove.

In line with this, the overall color quality of the cast parts seem to differ depending on the mold material; concrete cast in polyurethane rubber molds tend to display more vivid color, where colors may appear muted when cast in silicone rubber molds.

  ConcreteSteppingStone-01
[A concrete casting of a section of a tree made with a Poly 74-20 polyurethane mold]

 

Cost

Liquid silicone rubber costs about twice as much as polyurethane rubber.

By weight, it would require more silicone rubber than polyurethane rubber to create the same mold because silicone is more dense (our platinum silicone rubbers range from 21.3 in³/lb to 26.0 in³/lb, while our polyurethane rubbers range from 26.0 in³/lb to 27.5 in³/lb).

 

7420 Barkman Stone Veneer 030
[Poly 74-20 polyurethane rubber is being poured over veneer stone models]

 

Durability

Cured polyurethane rubbers exhibit physical properties that are generally “tougher” than silicones, so they are more resilient to wear and tear when molds are used repeatedly for years.

 

Release Properties

One advantage of silicone mold rubbers is that they have better release qualities than polyurethane rubbers – release agents are generally not necessary when casting concrete in silicone molds.

In most cases, release agent (e.g., Pol-Ease® 2650 Release Agent) should be applied to polyurethane rubber molds before casting concrete. Some softer polyurethane mold rubbers may not require release agent (e.g., Poly 74-20); however, it depends greatly on the concrete mix itself.

Veneer Stone Demolding
[Poly 74-20 molds can often be used without release agent]

 

Hardness Range

Polyurethane liquid mold rubbers offer a greater range of options. The hardest Polytek silicone option has a Shore hardness of A60, while Polytek polyurethane rubbers are available up to a Shore D45. These harder rubber options are very useful for making tools like stamping and texture mats, block-outs, and form liners.

 

 

StampingMat_Polytek

 

 [This brick-textured stamping mat was made from Poly 75-80, a Shore A80 rubber]

 

Video Tutorials

Some do find success in casting concrete with silicone mold rubbers. The video tutorial below features the use of a platinum silicone mold rubber (PlatSil® 73-40 Silicone Rubber) when making a mold of a decorative tabletop:

 

 

 

This video tutorial features the making of a polyurethane rubber (Poly 74-45 liquid rubber) Travertine panel mold:

 

 


As a follow-up to the previous video tutorial, concrete is cast in the Travertine panel mold:

 

 

 

 

Would you like to discuss your concrete casting project with a Polytek technical support staff member?

Call us at 800.858.5990
Email us at sales@polytek.com.
Fill out this simple online form.