Polytek^® Product Selector Tool

EasyFlo Black Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D70
Mix Ratio: 1A:1B by weight, 1A:1B by weight
Pot Life: ~2 Minutes
Demold Time: 10-15 Minutes
Color: Black

EasyFlo Clear Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D72
Mix Ratio: 1A:1B by volume, 100A:85B by weight
Pot Life: 2 - 2.5 Minutes
Demold Time: 15-30 Minutes
Color: Clear Amber

EasyFlo Spray FR Liquid Plastic
Type: Polyurethane Resin
Mix Ratio: 1A:1B by volume, 100A:90B by weight
Demold Time: 5-10 Minutes
Color: Off-White
NOTE: UL-94 (V-0) fire-retardant plastic

A two part, low-viscosity, epoxy adhesive with a long working time (120 minutes) and a 16-hour cure.
Only available in an 85-lb kit.

FormRub 35 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: A35
Mix Ratio: 1A:1B
Pour Time: 15 Minutes
Demold Time: 16 Hours
Color: Turquoise

FormRub 50 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: A50
Mix Ratio: 1A:1B
Pour Time: 15 Minutes
Demold Time: 16 Hours
Color: Opaque Orange

FormRub 60 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: A60
Mix Ratio: 1A:1B
Pour Time: 22 Minutes
Demold Time: 16 Hours
Color: Opaque Off-White/Tan

FormRub 65 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: A65
Mix Ratio: 1A:1B
Pour Time: 35 Minutes
Demold Time: 16 Hours
Color: Clear Yellow/Amber

A fine powder that can be added to polyurethane and silicone liquid rubbers to thicken them for brush-on/lay-up applications.

The traditional reinforcement material for plaster mother molds.

An alginate-based mold compound that can be used to make single-use molds of the face, hands, feet, torso or other exterior parts of the human body.
Cures in 5 minutes once mixed with water.

Use Hydrogel^® Retarder to extend the working time of Hydrogel^® Mold Compound.

Heavy duty, stainless steel, industrial/commercial mixer, specially designed for tough-to-mix, high-viscosity rubbers.
These Jiffy mixers fit all 1/4 to 3/4-inch chucked power tools.
Two sizes available.

This unique notched knife cuts a tongue-and-groove seam in a mold to create excellent registration and alignment.

NaturForm™ 30 Mask Making Latex Rubber is a one-part, pourable casting latex that can be used for mask making, prop making, flexible sculpture and some animatronic applications.