Polytek

Poly-Optic® 1410 Casting Resin

poly-optic-1410Poly-Optic® 1410 is a 3A:2B mix, water-clear, hard, Shore D80 polyurethane casting plastic that is great for making clear parts that look like water or glass. This casting resin can be colored with PolyColor Dyes to produce transparent, colored castings.

Cure Poly-Optic 1410 at room temperature and, for optimum physical properties, post cure at 150°F. Using pre-warmed molds hastens demold time, reduces shrinkage and improves the overall quality of the casting.

For a Poly-Optic product with a 1A:1B mix ratio, consider Poly-Optic 1411 Casting Resin.

Poly-Optic 1410 can be mixed with Poly-Optic 14-70 (a firm rubber) to achieve a variety of hardnesses between A70 and D85.

NOTES: Vacuum and/or pressure casting techniques are recommended for these products. Cure inhibition can occur when casting this resin in tin-cured silicone rubber molds – use a platinum-cured silicone rubber mold if working with silicones.

 

Specifications:

Mix Ratio Shore Hardness Pour Time Demold Time Cured Color Mixed Viscosity Specific Gravity Specific Volume Maximum Exotherm
3A:2B by weight D80 15 min. 2 hr. (1-inch thick)* Water-Clear 700 cP 1.07 27.5 in³/lb 265°F (2-lb mass)
Accessories: Poly-Optic 14 Part X Accelerator, PolyColor Dyes, Poly-Optic 14 Part R Retarder, Poly Purge Aerosol Dry Gas, UV Additive
*Demold time varies with thickness of casting and the amount of Poly-Optic Part X Accelerator added.

 

Product Literature: Technical Bulletin | Safety Data Sheets | Physical Properties Bulletin | Sealer & Release Agent Selection Guide

Video Tutorials: For Poly-Optic 14-Series video tutorials, visit the Poly-Optic 14-Series page or the Polytek YouTube Channel.

 

Select a Kit: