Polytek

Polygel® 35 Brush-On Rubber

brushable-polyurethane-mold-rubbersPolygel® 35 is a Shore A35, 1A:1B mix, brush-on, polyurethane liquid mold rubber designed for making thin, stretchy brushed molds. When Part A & Part B are mixed together, the rubber self-thickens to a creamy consistency ideal for making blanket or glove molds of complex objects. Great for casting plaster, concrete, as well as resins and foams with suitable releases.

NOTE ON FOUNDRY WAXES: Certain foundry waxes can cause excessive oiling in Polygel rubbers; this is the case when liquid Polygel is applied to the foundry wax and when the foundry wax is poured into cured Polygel molds. Perform a small test cure to ensure compatibility.

Specifications:

Mix Ratio Shore Hardness Pour Time Cured Color Mixed Viscosity Specific Volume Demold Time
1A:1B A35 8-10 min. Light Blue/Varies Medium Thixotropic 27.5 in³/lb ~16 hr.
Accessories: PolyFiber II Thickening Agent, PolyColor Dyes, Tietex® Fabric, Poly Purge Aerosol Dry Gas

 

Product Literature: Technical Bulletin | Safety Data Sheets | Physical Properties Bulletin | Sealers & Release Agents Selection Guide

Video Tutorials on YouTube: How to Make a Brush-On Mold with Polygel® 35

 

Select a Kit: