You are here

Polytek® Product Selector Tool

Use the product selection tool to find products that meet your specifications.

Displaying 76 - 90 of 176 products.

Add PlatThix Liquid Thickening Agent to PlatSil® Silicone Rubbers to thicken the liquid mix for brush-on application.

White petrolatum dissolved in mineral spirits.
This semi-permanent option can serve as a sealer and release agent on porous models when making polyurethane and silicone rubber molds.

Solvent and silicone-based release agent for use on models before pouring liquid polyurethane rubber.
Fast drying, but flammable. Not recommended for use with silicone mold rubbers.

Aerosol spray release agent that can be washed off of models. Can be applied to sealed or non-porous models for use with liquid silicone rubbers.
Also use to extend the mold life of silicone rubber molds when casting certain materials.
Can be applied to polyurethane rubber molds when release agent needs to be washed off of cast parts (to more easily accept paint), but the mold will degrade faster than when using Pol-Ease® 2300 Release Agent. 

Water-based release agent designed for use when casting concrete or plaster.
Works best when allowed to dry before casting. Should only be applied to cured polyurethane rubber molds.

Silicone-free, oil-based release agent designed for use when casting concrete or plaster.
After application, no drying time necessary prior to casting. Should only be applied to cured polyurethane rubber molds.

Pol-Ease® 2750 Latex Release Agent is designed specifically for use when casting concrete into latex rubber molds and will result in easier demolding of concrete parts and improved mold life.

A thin liquid that can be sprayed or brushed onto a polyurethane rubber mold to help protect and rejuvenate it.

This liquid concentrate is designed to reduce surface air bubbles on plaster castings made in Polytek rubber molds.

Add Poly 15 Part X to 15-Series polyurethane liquid plastics to accelerate pour times and cure times.

Poly 15-3 Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D80
Mix Ratio: 1A:1B
Pot Life: 15 Minutes
Demold Time: 12-16 Hours
Color: Tan

Poly 15-3X Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D80
Mix Ratio: 1A:1B
Pot Life: 5 Minutes
Demold Time: 1-12 Hour
Color: Tan

Poly 1511 Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D71
Mix Ratio: 1A:1B
Pot Life: 10 Minutes
Demold Time: 1-16 Hours
Color: White

Poly 1512 Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D71
Mix Ratio: 1A:1B
Pot Life: 22 Minutes
Demold Time: 1 - 16 Hours
Color: White

Poly 1512X Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D71
Mix Ratio: 1A:1B
Pot Life: 5 Minutes
Demold Time: 30 Minutes - 4 Hours
Color: White

Need Technical Support?

Call Us: 610.559.8620 | 800.858.5990

Monday - Friday | 8:30am - 4:30pm (EST)

 

Contact Us