Polytek

Poly 74-20 Liquid Rubber

Poly 74-20 for veneer stone manufacturingPoly 74-20 liquid polyurethane rubber is designed for making flexible, high-performance, high-strength molds that are particularly well-suited for casting concrete (veneer stone, architectural cast stone elements, concrete countertops, etc). Release agents are often not needed when casting concrete in Poly 74-20 molds.

These molds are also often used for casting materials such as plaster (for millwork, home décor, etc.), wax (candles & lost wax varieties) and resins (polyurethane, polyester, epoxy – with proper release agents). High tear and low viscosity make it especially easy to use.

Poly 74-20 liquid rubber is an excellent multi-purpose, economical mold material that will provide long mold life, durability and consistent performance under high volume casting applications. This rubber can be poured as supplied or thickened with Poly Fiber II or Fumed Silica for brushing.

 

Specifications:

Mix Ratio Shore Hardness Pour Time Cured Color Mixed Viscosity Specific Volume Demold Time
1A:2B A20 30 min. Yellow 800 cP 27.5 in³/lb ~16 hr.
Accessories: 74/75 Part C Softener, 74/75 Part X Accelerator, PolyFiber II Thickening Agent, UV Additive, Tietex® Fabric, Poly Purge Aerosol Dry Gas

 

Product Literature: Technical Bulletin | Safety Data Sheets | Physical Properties Bulletin | Sealer & Release Agent Selection Guide

Video Tutorials on YouTube: Making a Poly 74-20 Veneer Stone Mold for Casting Concrete | Making a Poly 74-20 Poured Block Mold

Select a Kit: