PlatSil^® Gel-OO30

Price:	$286.00

PlatSil^{^®} Gel-OO30 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a milky white, Shore OO30 rubber. This silicone is most often used to make hyper-realistic silicone masks, prosthetic appliances, animatronics, medical models and training aids and other special effects applications.

View all PlatSil^® Gels.

Select a Size:

Quantity

Find a Distributor

Looking for larger sizes (e.g., drum kits)? Please contact Customer Service at 800-858-5990 or [email protected]

This 16-lb kit includes:
8 lb of PlatSil^® Gel-OO30 Part A (~1 gallon)
8 lb of PlatSil^® Gel-OO30 Part B (~1 gallon)

Specifications & Product Information

Mix Ratio	Shore Hardness	Pour Time	Cured Color	Mixed Viscosity	Specific Volume	Demold Time	Shrinkage Upon Cure
1A:1B by weight or volume	OO30	45 min.	Milky White	6,200 cP	26 in³/lb	4 hr.	Nil

Notes:

Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers. For additional physical property specifications, refer to the Physical Properties Bulletin.

Product Literature

PlatSil^® Gel Series Technical Bulletin

Physical Properties Bulletin

Safety Data Sheet

Accessories

Use Silicone Color Pigments to color liquid silicone rubbers (TinSil^® and PlatSil^® rubbers).
7 colors available.

Silicone Color Pigments

Add PlatThix Liquid Thickening Agent to PlatSil^® Silicone Rubbers to thicken the liquid mix for brush-on application.

PlatThix Liquid Thickening Agent

Add PlatSil^® 71/73 Part R Retarder to PlatSil^® silicone rubbers to slow the pour times and cure times.

PlatSil^® 71/73 Part R Retarder

Add PlatSil^® 71/73 Part X Accelerator to PlatSil^® silicone rubbers to accelerate the pour times and cure times.

PlatSil^® 71/73 Part X Accelerator

Aerosol spray release agent that can be washed off of models. Can be applied to sealed or non-porous models for use with liquid silicone rubbers.
Also use to extend the mold life of silicone rubber molds when casting certain materials.
Can be applied to polyurethane rubber molds when release agent needs to be washed off of cast parts (to more easily accept paint), but the mold will degrade faster than when using Pol-Ease^® 2300 Release Agent.

Pol-Ease^® 2500 Release Agent

Add Silicone Fluid sparingly to liquid silicone rubbers (TinSil^® & PlatSil^®) to thin the mix and soften the cured rubber.
Also results in loss of strength and cure speed.

Silicone Fluid (50 cSt)

Related Products

PlatSil^® Gel-OO20
Type: Platinum-Cured Silicone Rubber
Shore Hardness: OO20
Mix Ratio: 1A:1B
Pour Time: 40 Minutes
Demold Time: 2 Hours
Color: Milky White

PlatSil^® Gel-OO20

PlatSil^® Gel-OO
Type: Platinum-Cured Silicone Rubber
Shore Hardness: OO30
Mix Ratio: 1A:1B
Pour Time: 6 Minutes
Demold Time: 30 Minutes
Color: Milky White

PlatSil^® Gel-OO

PlatSil^® Gel-1O
Type: Platinum-Cured Silicone Rubber
Shore Hardness: A10
Mix Ratio: 1A:1B
Pour Time: 6 Minutes
Demold Time: 30 Minutes
Color: Milky White

PlatSil^® Gel-10

PlatSil^® Gel-25
Type: Platinum-Cured Silicone Rubber
Shore Hardness: A25
Mix Ratio: 1A:1B
Pour Time: 5 Minutes
Demold Time: 60 Minutes
Color: Milky White

PlatSil^® Gel-25

You are here

PlatSil^® Gel-OO30