Polytek^® Product Selector Tool

Strong, conformable, reinforcing fabric.
Often used to reinforce the top of a seam in brushed or sprayed molds or laid into the back of a poured mold to increase durability.

TinSil^® 70-11 Silicone Rubber
Type: Tin-Cured Silicone Rubber
Shore Hardness: A10
Mix Ratio: 1A:10B
Pour Time: 45 Minutes
Demold Time: 16 Hours
Color: Blue

TinSil^® 70-20 Silicone Rubber
Type: Tin-Cured Silicone Rubber
Shore Hardness: A20
Mix Ratio: 1A:10B
Pour Time: 60 Minutes
Demold Time: 16 Hours
Color: Blue

TinSil^® 70-25 Silicone Rubber
Type: Tin-Cured Silicone Rubber
Shore Hardness: A25
Mix Ratio: 1A:10B
Pour Time: 60 Minutes
Demold Time: 16 Hours
Color: Blue

TinSil^® 70-60 Silicone Rubber
Type: Tin-Cured Silicone Rubber
Shore Hardness: A60
Mix Ratio: 5A:100B
Pour Time: 30 Minutes
Demold Time: 24 Hours
Color: Red
NOTE: This rubber is stable at high temperatures making it suitable for casting low-melting metals (it has very low tear strength because of its hardness).

TinSil^® 80-15 Silicone Rubber
Type: Tin-Cured Silicone Rubber
Shore Hardness: A15
Mix Ratio: 1A:10B
Pour Time: 30 Minutes
Demold Time: 24 Hours
Color: Peach

TinSil^® 80-40 Silicone
Rubber Type: Tin-Cured Silicone Rubber
Shore Hardness: A40
Mix Ratio: 1A:10B
Pour Time: 45 Minutes
Demold Time: 24 Hours
Color: Peach

TinSil^® Brush/Spray 25 Silicone Rubber
Type: Thixotropic Tin-Cured Silicone Rubber
Shore Hardness: A25
Mix Ratio: 1A:10B
Pour Time: 60 Minutes
Demold Time: 16 Hours
Color: Milky White

Add TinSil^® Deadener to TinSil^® silicone rubbers to "deaden" the silicone and simulate the look and feel of skin or human tissue.

Add TinSil^® FastCat Accelerator to TinSil^® silicone rubbers to accelerate the pour times and cure times.

TinSil^® Gel-10 Silicone Rubber
Type: Tin-Cured Silicone Rubber
Shore Hardness: A10
Mix Ratio: 1A:10B
Pour Time: 45 Minutes
Demold Time: 16 Hours
Color: Translucent

Add TinThix Liquid Thickening Agent to liquid tin-cured silicone rubbers (TinSil^®) to thicken the mix for brush-on application.

Patented, high-efficiency mixers fit any power drill with 1/2-inch chuck and mix more efficiently than Jiffy Mixers.
Options available for 1/2-gallon mixes to 55-gallon mixes.

Add UV Additive to liquid polyurethane rubbers and plastics to improve exterior durability and reduce surface degradation caused by sunlight or other UV light sources.

Convenient, low-cost mixing tools for small-quantity mixes.
Purchase 12 or a box of 500.