You are here

Polytek® Product Selector Tool

Use the product selection tool to find products that meet your specifications.

Displaying 106 - 120 of 176 products.

Poly 75-75 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: A75
Mix Ratio: 2A:1B
Pour Time: 20 Minutes
Demold Time: 16 Hours
Color: Amber

Poly 75-79 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: A80
Mix Ratio: 2A:1B
Pour Time: 20 Minutes
Demold Time: 16 Hours
Color: Yellow

Poly 75-80 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: A80
Mix Ratio: 2A:1B
Pour Time: 45 Minutes
Demold Time: 16 Hours
Color: Yellow

Poly 75-90 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: A90
Mix Ratio: 2A:1B
Pour Time: 10-15 Minutes
Demold Time: 16 Hours
Color: Tan

Poly 75-90 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: A90
Mix Ratio: 2A:1B
Pour Time: 10-15 Minutes
Demold Time: 16 Hours
Color: Opaque Amber

Poly 81-D45 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: D45
Mix Ratio: 100A:20B
Pour Time: 19 Minutes
Demold Time: 16 Hours
Color: Varies

Poly GlassRub 50 Liquid Rubber
Type: Polyurethane Rubber
Shore Hardness: A50
Mix Ratio: 1A:1B
Pour Time: 30 Minutes
Demold Time: 16 Hours
Color: Glass-Like/Blue-Clear

Poly Latex 60
Type: Latex Rubber
Poly Latex 60 is a one-part, brush-on liquid that, after multiple coats, builds up to form a tough rubber blanket mold. Latex molds can take weeks to make, but have better tear strength than most synthetic rubbers.

False Face is a one-part, pourable latex that, when poured into a dry, unsealed gypsum plaster mold, cures to a high-strength, flexible rubber.
Typically used to make novelty/Halloween masks.

Add Poly Latex N to Poly Latex 60 for spray application.

Poly LiteCast Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D55
Mix Ratio: 1A:1B
Pot Life: 5 Minutes
Demold Time: 30 Minutes to 4 Hours
Color: Tan

16″ paddle with flexible, rubber head assists with thorough mixing of Polytek® materials.

Poly Plasti-Flex Liquid Plastic
Type: Polyurethane Resin (Slightly Flexible)
Shore Hardness: ~A90
Mix Ratio: 35A:100B
Pot Life: 3 Minutes
Demold Time: ~15 Minutes
Color: Tan

A non-hardening, sulfur-free modeling clay.
Good for sculpting as well as reuseable caulk for mold boxes and mold shells to make them liquid tight.

A water-soluble (removable with water), alcohol-based sealer and release agent. Available in clear or green.
Mold Making: Use to seal porous models when making polyurethane and silicone rubber molds. Must use additional release agent (Pol-Ease 2300) when applying polyurethane rubber.
Casting: Can be applied to cured polyurethane rubber molds as a “barrier coat” and is most often used (in conjunction with Pol-Ease 2300) when casting polyester resin.