EasyFlo 60 Liquid Plastic

Price:	$123.00

EasyFlo 60 Liquid Plastic is a two-part, liquid polyurethane resin that cures (RTV) to a white, Shore D65 plastic. This product has a simple 1A:1B mix ratio by volume and a fast demold time of 15 to 30 minutes. EasyFlo 60 is a super low-viscosity, pourable plastic, but it can be easily thickened with PolyFiber II Thickener for brush-on application. For spray application, consider EasyFlo Spray FR.

View all EasyFlo Series Liquid Plastics.

FOR INDUSTRIAL/PROFESSIONAL USE ONLY.

Select a Size:

Quantity

Find a Distributor

Looking for larger sizes (e.g., drum kits)? Please contact Customer Service at 800-858-5990 or [email protected]

This 15.2-lb kit includes:
8 lb of EasyFlo 60 Part A (~1 gallon)
7.2 lb of EasyFlo 60 Part B (~1 gallon)

Specifications & Product Information

Mix Ratio	Shore Hardness	Pot Life	Demold Time	Cured Color	Mixed Viscosity	Specific Gravity	Specific Volume	Maximum Exotherm	Shrinkage Upon Cure
1A:1B by volume, 100A:90B by weight	D65	2 – 2.5 min.	15 – 30 min.	White	60 cP	1.03	26.9 in³/lb	230°F (1-lb mass)	0.0041 inch/inch

Notes:

The color of polyurethane Part Bs may change in color from batch to batch or may darken with age, but product performance is not affected. For additional physical property specifications, refer to the Physical Properties Bulletin.

Product Literature

EasyFlo Series Technical Bulletin

Physical Properties Bulletin

Safety Data Sheet - Part A

Safety Data Sheet - Part B

Accessories

Liquid dyes for coloring Polytek polyurethane liquid rubber and plastic products.
8 color options.

PolyColor Dyes

Add PolyFiber II to Polytek^® liquid polyurethane plastics or rubbers to thicken for brush-on application or to make mold shells.

PolyFiber II Thickener

A silicone-based, aerosol spray release agent for use on non-porous or sealed models when making polyurethane rubber molds.
Not recommended for use with silicone mold rubbers.
Also apply to cured polyurethane molds when casting a variety of materials, including polyurethane liquid plastics, rubber and epoxies.

Pol-Ease^® 2300 Release Agent

Create cold cast bronze parts with Bronze Powder (325 Mesh).

Bronze Powder (325 Mesh)

Spray PolyPurge dry gas into open containers of liquid polyurethane products just before resealing the lid.
PolyPurge displaces moist air, thus extending the life of the liquid product.

PolyPurge Dry Aerosol Gas

Add PolyFil ND (neutral density) filler to Polytek^® liquid polyurethane rubbers and plastics to reduce the cost of the casting without changing its density and/or reduce shrinkage in polyurethane plastics.
Adding filler can affect the physical properties of cured rubber.

PolyFil ND (Neutral-Density) Filler

Related Products

EasyFlo 120 Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D65
Mix Ratio: 1A:1B by volume, 100A:90B by weight
Pot Life: 2 - 2.5 Minutes
Demold Time: 15-30 Minutes
Color: White

EasyFlo 120 Liquid Plastic

EasyFlo Black Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D70
Mix Ratio: 1A:1B by weight, 1A:1B by weight
Pot Life: ~2 Minutes
Demold Time: 10-15 Minutes
Color: Black

EasyFlo Black Liquid Plastic

EasyFlo Clear Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D72
Mix Ratio: 1A:1B by volume, 100A:85B by weight
Pot Life: 2 - 2.5 Minutes
Demold Time: 15-30 Minutes
Color: Clear Amber

EasyFlo Clear Liquid Plastic

EasyFlo 90 Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D70
Mix Ratio: 1A:1B by volume, 100A:90B by weight
Pot Life: 5 Minutes
Demold Time: 1-2 Hours
Color: White

EasyFlo 90 Liquid Plastic

EasyFlo 100 FR Liquid Plastic
Type: Polyurethane Resin
Shore Hardness: D65
Mix Ratio: 1A:1B
Pot Life: 2 - 2.5 Minutes
Demold Time: 15-30 Minutes
Color: Off-White/Tan
NOTE: UL-94 (V-0) fire-retardant plastic

EasyFlo 100 FR Liquid Plastic

EasyFlo Spray FR Liquid Plastic
Type: Polyurethane Resin
Mix Ratio: 1A:1B by volume, 100A:90B by weight
Demold Time: 5-10 Minutes
Color: Off-White
NOTE: UL-94 (V-0) fire-retardant plastic

EasyFlo Spray FR Liquid Plastic

You are here

EasyFlo 60 Liquid Plastic