PlatSil^® 71-11 Silicone Rubber

Price:	$286.00

PlatSil^® 71-11 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a blue-green, Shore A10 rubber. This is a pourable rubber, but it can be easily thickened with PlatThix Liquid Thickener or Fumed Silica for brush-on application.

View all PlatSil^® Silicone Mold Rubbers.

FOR INDUSTRIAL/PROFESSIONAL USE ONLY.

Select a Size:

Quantity

Find a Distributor

Looking for larger sizes (e.g., drum kits)? Please contact Customer Service at 800-858-5990 or [email protected].com

This 16-lb kit includes:
8 lb of PlatSil^® 71-11 Part A (~1 gallon)
8 lb of PlatSil^® 71-11 Part B (~1 gallon)

Specifications & Product Information

Mix Ratio	Shore Hardness	Pour Time	Cured Color	Mixed Viscosity	Specific Volume	Demold Time	Shrinkage Upon Cure
1A:1B	A10	20 min.	Blue-Green	6,000 cP	24.7 in³/lb	4 hr.	Nil

Notes:

Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers. For additional physical property specifications, refer to the Physical Properties Bulletin.

Product Literature

PlatSil^® 71 & 73-Series Technical Bulletin

Physical Properties Bulletin

Safety Data Sheet

Accessories

Add PlatSil^® 71/73 Part X Accelerator to PlatSil^® silicone rubbers to accelerate the pour times and cure times.

PlatSil^® 71/73 Part X Accelerator

Add PlatSil^® 71/73 Part R Retarder to PlatSil^® silicone rubbers to slow the pour times and cure times.

PlatSil^® 71/73 Part R Retarder

Add PlatThix Liquid Thickening Agent to PlatSil^® Silicone Rubbers to thicken the liquid mix for brush-on application.

PlatThix Liquid Thickening Agent

A fine powder that can be added to polyurethane and silicone liquid rubbers to thicken them for brush-on/lay-up applications.

Fumed Silica

Use Silicone Color Pigments to color liquid silicone rubbers (TinSil^® and PlatSil^® rubbers).
7 colors available.

Silicone Color Pigments

Aerosol spray release agent that can be washed off of models. Can be applied to sealed or non-porous models for use with liquid silicone rubbers.
Also use to extend the mold life of silicone rubber molds when casting certain materials.
Can be applied to polyurethane rubber molds when release agent needs to be washed off of cast parts (to more easily accept paint), but the mold will degrade faster than when using Pol-Ease^® 2300 Release Agent.

Pol-Ease^® 2500 Release Agent

Add Silicone Fluid sparingly to liquid silicone rubbers (TinSil^® & PlatSil^®) to thin the mix and soften the cured rubber.
Also results in loss of strength and cure speed.

Silicone Fluid (50 cSt)

Accurately weigh Polytek rubbers, plastics and foams with a digital scale (200-lb capacity & 5,000-g capacity available).

Digital Scales

Related Products

PlatSil^® 71-10 Silicone Rubber
Type: Platinum-Cured Silicone Rubber
Shore Hardness: A10
Mix Ratio: 1A:10B
Pour Time: 5 Minutes
Demold Time: 30 Minutes
Color: Pink

PlatSil^® 71-10 Silicone Rubber

PlatSil^® 73-15 Silicone Rubber
Type: Platinum-Cured Silicone Rubber
Shore Hardness: A15
Mix Ratio: 1A:1B
Pour Time: 20 Minutes
Demold Time: 4-5 Hours
Color: White Translucent

PlatSil^® 73-15 Silicone Rubber

PlatSil^® Gel-1O
Type: Platinum-Cured Silicone Rubber
Shore Hardness: A10
Mix Ratio: 1A:1B
Pour Time: 6 Minutes
Demold Time: 30 Minutes
Color: Milky White

PlatSil^® Gel-10

You are here

PlatSil^® 71-11 Silicone Rubber