You are here
Pol-Ease® 2450 Release Agent
Pol-Ease® 2450 Release Agent
| Price: | $17.00 |
Pol-Ease® 2450 is a solvent and silicone-based release agent. Fast drying, but flammable. For Mold Making: Apply to sealed or non-porous models when making polyurethane rubber molds (not recommended for use with liquid silicones). For Casting: Can be applied to cured polyurethane rubber molds when casting liquid polyurethane. Use of a soft brush to evenly distribute this product or dispense with a Sure Shot Atomizer. NOTES: Shake or stir before use.
Looking for larger sizes (e.g., drum kits)? Please call Customer Service (800-858-5990 or 610-559-8620) or email [email protected].
Product Literature
Accessories
Related Products
White petrolatum dissolved in mineral spirits.
This semi-permanent option can serve as a sealer and release agent on porous models when making polyurethane and silicone rubber molds.
A silicone-based, aerosol spray release agent for use on non-porous or sealed models when making polyurethane rubber molds.
Not recommended for use with silicone mold rubbers.
Also apply to cured polyurethane molds when casting a variety of materials, including polyurethane liquid plastics, rubber and epoxies.
Aerosol spray release agent that can be washed off of models. Can be applied to sealed or non-porous models for use with liquid silicone rubbers.
Also use to extend the mold life of silicone rubber molds when casting certain materials.
Can be applied to polyurethane rubber molds when release agent needs to be washed off of cast parts (to more easily accept paint), but the mold will degrade faster than when using Pol-Ease® 2300 Release Agent.
A water-soluble (removable with water), alcohol-based sealer and release agent. Available in clear or green.
Mold Making: Use to seal porous models when making polyurethane and silicone rubber molds. Must use additional release agent (Pol-Ease 2300) when applying polyurethane rubber.
Casting: Can be applied to cured polyurethane rubber molds as a “barrier coat” and is most often used (in conjunction with Pol-Ease 2300) when casting polyester resin.
PolyCoat is a semi-permanent, silicone-based sealer and release agent.
Mold Making: Can be applied to non-porous or porous models when making polyurethane and platinum-cured silicone rubber molds (not recommended for tin-cured silicone rubbers).
Casting: Can be applied to cured polyurethane, platinum-cured silicone, and tin-cured silicone rubber molds to extend their useful life.
Need Technical Support?
Call Us: 610.559.8620 | 800.858.5990
Monday - Friday | 8:30am - 4:30pm (EST)