TinSil^® 80-30 Silicone Rubber

Price:	$41.00

TinSil^® 80-30 Silicone Rubber is a two-part, tin-catalyzed, liquid silicone system that cures (RTV) to a peach, Shore A30 rubber. This is a pourable rubber, but it can be easily thickened with TinThix Liquid Thickener or Fumed Silica for brush-on application.

View all TinSil^{^®} Silicone Mold Rubbers.

Select a Size:

Quantity

Find a Distributor

This 1-lb kit includes:
0.1 lb of TinSil^® 80-30 Part A (~2 oz)
0.9 lb of TinSil^® 80-30 Part B (~1 pint))

Specifications & Product Information

Mix Ratio	Shore Hardness	Pour Time	Cured Color	Mixed Viscosity	Specific Volume	Demold Time	Shrinkage Upon Cure
1A:10B	A30	45 min.	Peach	17,000 cP	23.7 in³/lb	24 hr.	0.002 inch/inch

Notes:

Shake or Stir Part A before use. This is a 1A:10B mix ratio product that must be measured by weight. For additional physical property specifications, refer to the Physical Properties Bulletin.

Product Literature

TinSil^® 80-Series Technical Bulletin

Physical Properties Bulletin

Safety Data Sheet - Part A

Safety Data Sheet

Accessories

Add TinThix Liquid Thickening Agent to liquid tin-cured silicone rubbers (TinSil^®) to thicken the mix for brush-on application.

TinThix Liquid Thickening Agent

Add TinSil^® FastCat Accelerator to TinSil^® silicone rubbers to accelerate the pour times and cure times.

TinSil^® FastCat Accelerator

Use Silicone Color Pigments to color liquid silicone rubbers (TinSil^® and PlatSil^® rubbers).
7 colors available.

Silicone Color Pigments

Aerosol spray release agent that can be washed off of models. Can be applied to sealed or non-porous models for use with liquid silicone rubbers.
Also use to extend the mold life of silicone rubber molds when casting certain materials.
Can be applied to polyurethane rubber molds when release agent needs to be washed off of cast parts (to more easily accept paint), but the mold will degrade faster than when using Pol-Ease^® 2300 Release Agent.

Pol-Ease^® 2500 Release Agent

A fine powder that can be added to polyurethane and silicone liquid rubbers to thicken them for brush-on/lay-up applications.

Fumed Silica

Add Silicone Fluid sparingly to liquid silicone rubbers (TinSil^® & PlatSil^®) to thin the mix and soften the cured rubber.
Also results in loss of strength and cure speed.

Silicone Fluid (50 cSt)

Accurately weigh Polytek rubbers, plastics and foams with a digital scale (200-lb capacity & 5,000-g capacity available).

Digital Scales

Related Products

TinSil^® 80-15 Silicone Rubber
Type: Tin-Cured Silicone Rubber
Shore Hardness: A15
Mix Ratio: 1A:10B
Pour Time: 30 Minutes
Demold Time: 24 Hours
Color: Peach

TinSil^® 80-15 Silicone Rubber

TinSil^® 80-40 Silicone
Rubber Type: Tin-Cured Silicone Rubber
Shore Hardness: A40
Mix Ratio: 1A:10B
Pour Time: 45 Minutes
Demold Time: 24 Hours
Color: Peach

TinSil^® 80-40 Silicone Rubber

You are here

TinSil^® 80-30 Silicone Rubber